Introduction; Use And Function - NUVE BM 15 Instruction Manual

1. INTRODUCTION

1.1. USE AND FUNCTION

BM 15 and BM 30 Water Baths are designed to be used in bacterial culturing, cell culture,
coagulation tests, coliform determination, enzyme reactions and other general and special
applications.
The BM Series provide temperatures between 5°C above the ambient temperature and 99.9 °C
and keeps the temperature stable within the given tolerances.
BM Series have circulation function. The circulation pump and etched foil heaters which are
placed at the outer sides of the tank provide absolutely homogenous temperature distribution
in the tank. They offer excellent temperature control of liquid producing a uniform and stable
heating environment for the applications.
The baths has a microprocessor control system. The heating is based on PID controlled system.
There are two digital displays for heating function. One of them is temperature display the other
is timer which can be programmed up to 99.9 hours and including HOLD position.
All components which are in contact with the liquid are made of high grade stainless steel to
resist corrosion. The tank is insulated with glass wool for operating homogenous temperature
distribution.
The BM Series Water Baths are manufactured according to the following standards:
EN 61010-1, EN 61000-6-3, EN 50419.
This device is in compliance with WEEE Regulation.
If mentioned warnings in this manual are not considered, NÜVE will not be responsible from
their results.
5