Table of Contents
Advertisement
1. Before Using the Product
1. Before Using the Product
About the Product
This product is a PCI-bus compliant digitizer board. It is designed with the following features:
10-bit resulotion, up to 100MSPS (10nsec) conversion speed, sampling 2 channels simtaneously.
In addition, it features with the PASS/FAIL judgment functionality by comparing input data with the
setted standard data (mask data) one by one.
The large (16M data) on-board memory and bus master transfer function allow continuous data
acquisition to be performed at high speed for a long period.
The automation of the measurement is facilitated by factors such as various sampling control and
waveform judgment function based on mask data.
The mask editor software is attached as a tool to generate comparison waveform data.
You can create the waveform data by drawing on screen directly with mouse or drawing with
mathematics functions (input numerical values).
Moreover, you can make use of the supplied front panel soft as an oscilloscope or a waveform judgment
instrument. In addition, Windows API is also supplied, so that you can also program in Visual Baisc or
Visual C++.
Features
Free yourself from visual inspection. The inspected input
signal can be automatically judged whether OK or NG.
By comparing the sampled signal waveform with the pass
range which is set beforehand, a pass or fail judgement
can be done automatically with the waveform level.
It is intended to not only save labor on present visual
examination greatly but also improve/uniform the quality.
Moreove, the "Mask Editor Software" is supplied as a tool
to create comparison waveform data and is Windows exclusive use, by which the following operation
can be done, drawing on screen directly/drawing straight line/sine wave with mouse, drawing constant
voltage/ square wave/triangular wave/step//ramp/sawtooth wave with mathematics functions.
"Front panel software" is suppiled that can be used as the
oscilloscope or the waveform judgement instrument easily.
The "Front Panel Software" , an application that makes an
image of oscilloscope or waveform judgment instrument,
is supplied. You can use it easily with no need of
programming.
Moreover, you can use it to check the configured
execution environment, because it features the
functionality of diagnosing and reporting the status of the
board and device driver.
1
DIG-100M1002-PCI
Advertisement
Table of Contents
