Contec DIG-100M1002-PCI User Manual page 68

*8 : If the accuracy for the externally input clock is worse than the accuracy listed in time based accuracy, this product
acquires the data 1.3 µs (max) before the external trigger signal was input when external trigger signal input was
used for the pre-/post-trigger.
*9 : This product requires +5V and +3.3V power supply from expansion slots.
Board Dimensions
176.41(L)
The standard outside dimension (L) is the distance
from the end of the board to the outer surface of the
slot cover.
DIG-100M1002-PCI
[mm]
6. About Hardware
61