Table of Contents
Advertisement
-
Make sure that your PC or expansion unit can supply ample power to all the products installed.
Insufficiently energized products could malfunction, overheat, or cause a failure.
-
The specifications of this product are subject to change without notice for enhancement and quality
improvement.
Even when using the product continuously, be sure to read the manual and understand the contents.
-
Do not modify the product. CONTEC will bear no responsibility for any problems, etc., resulting
from modifying this product.
-
Regardless of the foregoing statements, CONTEC is not liable for any damages whatsoever
(including damages for loss of business profits) arising out of the use or inability to use this
CONTEC product or the information contained herein.
-
Regarding "CE EMC Directive Notice"
The ferrite core must be installed in connecting cable so that this product may suit the above-
mentioned standard.
Name
E04SR130525A*
* Equivalent product can also be used.
Image diagram
DIG-100M1002-PCI
Maker
Turn
Quantity
SEIWA
1
1
Ferrite core
Installation Site
on interface cable(CLK) at product
Cable
TURN: 1
1. Before Using the Product
TURN: 2
TURN: 3
TURN: 4
7
Advertisement
Table of Contents
