Table of Contents
Advertisement
3. External Connection
Connector Pin Assignment
Pin Assignment of CH0, CH1, CLK, TRG
Analog Input 0 - 1
Analog Ground
Trigger Input (IN)
Trigger Output (OUT)
Reference CLK
Digital Ground
Figure 3.3. Pin Assignment of CH0, CH1, CLK, TRG
CAUTION
Please do not connect the analog ground and the digital ground.
The measurement result of the analog signal may be influenced.
24
Analog input signals. The numbers correspond to channel numbers.
Analog ground common to analog input signals.
External trigger input signal used for sampling start condition and sampling clock etc.
Combined use of the external trigger output and the connector.
Can be only used as either external trigger input or external trigger output.
Outputs internal sampling clock and waveform judgment result as status signal.
Combined use of the external trigger input and the connector.
Can be only used as either external trigger input or external trigger output.
Reference clock I/O signal
Can be only used as either input or output.
Digital ground common to digital I/O signals.
DIG-100M1002-PCI
Advertisement
Table of Contents
