Table of Contents
Advertisement
1. Before Using the Product
Safety Precautions
Understand the following definitions and precautions to use the product safely.
Safety Information
This document provides safety information using the following symbols to prevent accidents resulting
in injury or death and the destruction of equipment and resources. Understand the meanings of these
labels to operate the equipment safely.
DANGER indicates an imminently hazardous situation which, if not avoided, will
DANGER
result in death or serious injury.
WARNING indicates a potentially hazardous situation which, if not avoided, could
WARNING
result in death or serious injury.
CAUTION indicates a potentially hazardous situation which, if not avoided, may
CAUTION
result in minor or moderate injury or in property damage.
Handling Precautions
DANGER
Do not use the product where it is exposed to flammable or corrosive gas. Doing so may result in
an explosion, fire, electric shock, or failure.
CAUTION
-
There are switches and jumpers on this product that need to be set in advance.
Be sure to check these before installing this product.
-
Only set the switches and jumpers on this product to the specified settings.
Otherwise, this product may malfunction, overheat, or cause a failure.
-
Do not strike or bend this product.
Otherwise, this product may malfunction, overheat, cause a failure or breakage.
-
Do not touch this product's metal plated terminals (edge connector) with your hands.
Otherwise, this product may malfunction, overheat, or cause a failure.
If the terminals are touched by someone's hands, clean the terminals with industrial alcohol.
-
As this product contains components that are designed to operate at high temperature, please do not
touch this product when it is in use.
The 50Ω termination resistor in particular can become hot if it is used.
-
Do not install this product to the expansion slot and do not plug or unplug the cables which are
connected to this product while the PC or expansion chassis is still turned on.
Otherwise, this product may malfunction, overheat, or cause a failure.
Be sure that the personal computer power is turned off.
-
Do not touch the external connector (BNC connector) when the power is on.
Otherwise this may malfunction, cause a failure due to static electricity.
6
DIG-100M1002-PCI
Advertisement
Table of Contents
