Contec DIG-100M1002-PCI User Manual page 67

100msps 2ch digitizer board for pci
Hide thumbs Also See for DIG-100M1002-PCI:
Table of Contents

Advertisement

6. About Hardware
Table 6.1. Specification < 3 / 3 >
Item
Reference clock I/O
Input frequency
Input impedance
Input coupling
Input voltage
Max.input voltage
Output frequency
Output impedance
Output coupling
Output voltage
Output frequency accuracy
External trigger I/O
Logic type
Output impedance
I/O coupling
I/O signal
Trigger system
source
Conversion start trigger
Conversion stop trigger
External start signal
External stop signal
External status output
signal
Bus master section
DMA channels
Transfer bus width
Transfer data length
FIFO
Scatter/Gather function
Synchronization bus section
Control output signal
Control input signal
Max. board count for
connection
Connector
Common
I/O address
Interrupt level
Connector used
Currrent consumption
Operating condition
Bus specification
Dimensions (mm)
Weight
60
10MHz (Duty cycle is within 50±5%) *8
600Ω
AC
0.2Vpk - 3.3Vpk
±5V
10MHz
50Ω
DC
When 50Ω terminal resistance is used : 1V When open : 2V
±5ppm (aging: ±1ppm/year)
3.3V LVTTL
50Ω
DC
Trigger, general-purpose digital signal
CH0, CH1, software, trigger input, synchronous control connector
Software, conversion data compare, external trigger, and event
controller output.
Settings include data save complete, conversion data compare,
external trigger, event controller output, and software.
LVTTL level (Rising or falling edge can be selected by software)
LVTTL level (Rising or falling edge can be selected by software)
LVTTL level Sampling clock output
1channel
32bit
8 PCI data length (Max.)
1K data
64M-Byte
Selection of output signal with the software when specifying a sync
master board.
Selection of sync factor with the software when specifying sync slave
boards.
16 boards including the master board
PS-10PE-D4LI-B1 (mfd. By JAE) or equivalence to it x 2
64 ports x 1, 256 ports x 1 region
Errors and various factors, One interrupt request line as INTA
BNC (Characteristic Impedance 50Ω)
5VDC 1.9A (Max.), 3.3VDC 0.1A (Max.)
0 - 50°C, 10 - 90%RH (No condensation)
PCI (32bit, 33MHz, Universal key shapes supported *9)
176.41(L) x 105.68(H)
400g
Specification
DIG-100M1002-PCI

Advertisement

Table of Contents
loading

Table of Contents