Table of Contents
Advertisement
4. Functions
Status / Data Acquisition
Binary / Voltage acquisition
The acquisition data can be acquired by the unit of binary value or voltage value.
Record data acquisition
The acquisition data is retrieved by a sample unit when the digitizer is used in data logger mode.
The sample data can be acquired not only during the operation but also after the operation of the
digitizer.
Moreove, the acquisition is always be done from the oldest data in data logger mode.
One-shot measurement
The one-shot measurement can be done besides the usual data acquisition operation.
The present value of a signal input into the digitizer can be acquired by the one-shot measurement.
The one-short measurement can be done when the digitizer is operating.
Overview and detail of waveform judgment result
In waveform judgment instrument mode, the overview data and the detailed data of the waveform
judgment result can be acquired while the acquisition data is being retrieved.
The overview data of the waveform judgment result contains the state of OK or NG for the judgment
result of the record.
The detailed data of the waveform judgment result contains the information that each sample data of the
record whether exceeds the upper bound/lower bound value of the mask data, or is within the range.
42
DIG-100M1002-PCI
Advertisement
Table of Contents
