Setup; What Is Setup; Using The Board Under Windows Using The Driver Library Api-Pac(W32) Ctest - Contec DIG-100M1002-PCI User Manual

2. Setup

This chapter explains how to set up the board.

What is Setup?

Setup means a series of steps to take before the product can be used.
Different steps are required for software and hardware.
The setup procedure varies with the OS and applications used.
Using the Board under Windows
Using the Driver Library API-PAC(W32) cTEST
This section describes the setup procedure to be performed before you can start developing application
programs for the board using the bundled CD-ROM "Driver Library API-PAC(W32) cTEST".
Taking the following steps sets up the software and hardware. You can use the front panel software
later to check whether the software and hardware function normally.
Step 1 Installing the Software
Step 2 Setting the Hardware
Step 3 Installing the Hardware
Step 4 Checking and Changing the Initialization Setup
Step 5 Checking Operations with the front panel software
If Setup fails to be performed normally, see the "Setup Troubleshooting" section at the end of this
chapter.
DIG-100M1002-PCI
2. Setup
9