Step 5 Checking Operations With The Front Panel Software; What Is The Front Panel Software; Check Method - Contec DIG-100M1002-PCI User Manual

2. Setup
Step 5 Checking Operations with the Front Panel
Software
Use the front panel software to check that the board and driver software work normally, thereby you can
confirm that they have been set up correctly.

What is the front panel software?

The front panel software is an application which can be used as an oscilloscope or
it also has the function of diagnosing the state of the board and its driver.
Using the "Diagnosis Report" feature reports the driver settings, the presence or absence of the board,
I/O status, and interrupt status.

Check Method

Connect an external signal source to check the analog input data.
The diagrams below show examples of inputting the signal from channel 0. For details on the
connections, see Chapter 3 "External Connection".
CAUTION
Input data remains indeterminate when no input pin is connected. The input pin for the channel
not connected to the signal source must be connected to the analog ground. For details, see
Chapter 3 "External Connection".
18
waveform instrument
judgment
DIG-100M1002-PCI
,