Oneida Air Systems 8491685 Owner's Manual page 19

Assembly Instructions (Continued)
To permanently secure the starter to the wall,
17
take off the starter cover by removing the top
and bottom screws and exposing the overload
and contact connections [FIG 17a]. Set aside
the screws.
a. Place a mark through the four mounting
holes [FIG 17b].
b. Use appropriate fasteners for the wall type
you are installing your system onto.
c. Drill into the wall at the marked locations.
d. Secure the starter to the wall.
Reattach the cover with the screws set aside in
18
Step 17 [FIG 18].
Top
Screws
START
STOP
Bottom
Screws
FIG. 17a
START
STOP
FIG. 18
Mounting
Holes
Mounting
Holes
FIG. 17b
oneida-air.com 17