Summary of Contents for Oneida Air Systems Dust Deputy AXD001004
Page 1
Whisperer.” www.thewoodwhisperer.com Dust Collection Since 1993. Oneida Air Systems, Inc. 2010 5hp Smart Pro System Dust Cobra Oneida Air Systems, Inc. 1001 W. Fayette St., Syracuse, NY 13204 Ph. 1.800.732.4065 or 315.476.5151 / Fax: 315.476.5044 Made in the USA www.oneida-air.com...
Page 2
Limited Warranty D.I.Y. Dust Deputy® Assembly 6 - 7 Oneida Air Systems™ warrants the products manufactured by Oneida Air Systems, for a period of 90 days or more depend- Deluxe Dust Deputy® Assembly 8-11 ing on the product, to the original purchaser from the date of purchase unless otherwise specified. Items not manufactured by Oneida Air Systems are limited to their own manufacturer’s warranties.
Page 3
XIII. Accessories I. System Start-Up Information (Cont.) Safety Instructions to be Strictly Followed. UltraClean Scraper™ Read the installation and maintenance instructions as well as the recom- Part # Description mended safety practices in this manual and your shop vacuum’s owner’s Hollow handle scraper attaches manual before assembling and using the Dust Deputy®.
Page 4
XIII. Accessories II. D.I.Y. Kit Contents Order Online at www.oneida-air.com Plastic D.I.Y. Dust Deputy® - AXD001004 U.S. Patent #7,282,074 C1 Dust Sentry™ With the D.I.Y. Dust Deputy, you only receive the plastic cyclone. Part # Description You must supply all hardware and buckets yourself.
Page 5
XII. Troubleshooting III. Ultimate Kit Contents Ultimate Dust Deputy® - AXD000009 - Adaptor, Cuff 2.5” - 2.25” (1) AXD250225 U.S. Patent #7,282,074 C1 Dust Deputy® not separating well. (Only a tiny amount of dust should reach the U.S. Patent #D668409 - Elbow 2.5”...
Page 6
IV. 10 Gal. Deluxe Contents XI. Super Dust Deputy® Super Dust Deputy® - AXD002030 10 Gal Deluxe Dust Deputy® - AXD000010 U.S. Patent #7,282,074 C1 Turn Any Single Stage Collector Into A Super Cyclonic Dust Collector! U.S. Design Pat. App. # 29/358,526 29/358,497 1.
Page 7
X. Adding Cyclones to Improve Performance V. Assembly Instructions for D.I.Y. Dust Deputy® The Dust Deputy is made of static dissipating plastic*. Top View Hose to These are the minimum parts you will need to acquire to use the Dust Deputy: Vacuum This arrangement may be useful Hose...
Page 8
Additional Ideas for the D.I.Y. Dust Deputy® IX. Other Options for Securing Dust Deputy® Deluxe to Vacuum Gasket can be glued to bottom of bucket lid. A.) An example of a plywood top that had a groove routed out of it to fit the bucket rim and accommodate the gasket.
Page 9
VI. Assembly Instructions for Deluxe Dust Deputy® Kit IX. Possible Ways to Attach Dust Deputy® Deluxe to Shop Vacuums You may want to attach your Dust Deputy This is just one example of attaching the Deluxe Dust Example 1 to your shop vacuum for mobility, conve- Deputy®...
Page 10
VIII. Installing the Dust Bagger VI. Assembly Instructions for Deluxe Dust Deputy® Kit 4.) Position foam block on marks and drill two holes (upper Attach vacuum hose elbow Fig. 6 and lower) through foam block and bucket (Fig.6). Put the two Fig.5 with valve to vacuum as supplied carriage bolts through the large washers and then...
Page 11
VII. Assembly Instructions for Ultimate Dust Deputy® VI. Assembly Instructions for Deluxe Dust Deputy® Kit The Dust Deputy® is made of static dissipating plastic. 5. Pull up latch so hole in latch goes over the pin / boss on Dust Box top. 6.
Page 12
VI. Assembly Instructions for Deluxe Dust Deputy® Kit VII. Assembly Instructions for Ultimate Dust Deputy® If hoses are not tight on the inlet, or keep 1. With a Phillips head screwdriver, attach Make sure larger the two rubber latches, one on either side of diameter hoses are pulling off, use the included Hose Reten- pushed up so they fit...