Oneida Air Systems 8491685 Owner's Manual page 17

Assembly Instructions (Continued)
Attach a Fine Dust Bin (M6) to each Filter (N)
13
with four J-Bolts (M4) and four
(M2) as shown in [FIG. 13].
To ground the lter, attach the ring terminal
14
on the braided ground wire from the Motor
Assembly (A) to a J-bolt (M4) on the Dual
Filter Plate (L) under the
then attach the alligator clip to the lter's cage
[FIG. 14].
Note: If you need to extend the wire, you can
use any 16 gauge copper stranded wire and
connect with wire nuts.
umb Nuts
umb Nut (M2),
FIG. 13
FIG. 14
oneida-air.com 15