Oneida Air Systems 8491685 Owner's Manual page 12

Assembly Instructions (Continued)
Once your Cone (D) is aligned with the Stand
4
(P), li the Barrel (C) onto the Cone, making
sure to align the corresponding ange holes.
Secure both components to the stand using
twelve Hex Head Bolts (O7), twenty-four Flat
Washers (O3), and twelve Whiz-Lock Nuts
(O8) [FIG 4].
Li the Fan Housing (B) onto the Barrel (C),
5
making sure it is oriented so that the molded
"UP" text is visible. Align the housing's holes
with the holes in the barrel and keep in mind
the direction you want your outlet to face.
[FIG 5].
Secure the Fan Housing onto the Barrel using
eight Flange Bolts (O2) and eight Flat Washers
(O3).
10 Oneida Air Systems
FIG. 4
FIG. 5