Oneida Air Systems Dust Deputy AXD001004 Owner's Manual
  1. Manuals
  2. Brands
  3. Oneida Air Systems Manuals
  4. Dust Collector
  5. Dust Deputy AXD001004
  6. Owner's manual

Oneida Air Systems Dust Deputy AXD001004 Owner's Manual

Plastic d-i-y dust deputy
Hide thumbs Also See for Dust Deputy AXD001004:
1
2
3
4
5
6
7
8
Table of Contents

Advertisement

Quick Links

Download this manual See also: Owner's Manual
U.S. Patent # 7,282,074
E.U. Patent Pending
(24145)
This kit contains
only the plastic
Dust Deputy cyclone.
No other hardware
or accessories
are included.
Captures 99% of the dust before it reaches your shop
vacuum. No fi lter clogging and no loss of suction.
Plastic D-I-Y Dust Deputy Owner's Manual
1.800.732.4065
Oneida Air Systems, Inc. was founded in 1993 to bring cost effective, state-of-the-art dust collection sys-
tems and material handling ductwork to woodworking shops. OAS designs and manufactures industrial
grade dust collection systems that create a practical, safe and healthy work place environment.
AXD001004
R
www.oneida-air.com
RTD10000667AB
ZBM000029
2_09

Advertisement

Table of Contents
loading

Related Manuals for Oneida Air Systems Dust Deputy AXD001004

Summary of Contents for Oneida Air Systems Dust Deputy AXD001004

  • Page 1 1.800.732.4065 Oneida Air Systems, Inc. was founded in 1993 to bring cost effective, state-of-the-art dust collection sys- tems and material handling ductwork to woodworking shops. OAS designs and manufactures industrial grade dust collection systems that create a practical, safe and healthy work place environment.

  • Page 2: System Start-Up Information

    Thank You for Choosing an Oneida Air Systems Product! OAS manufactures and sells dust collection equipment only. Our qualifi ed technicians and sales staff are available 7:30am - 6:00pm EST Mon. - Thurs. and 7:30am - 5:00pm EST Fri. to answer any questions concerning OAS products and dust collection.
  • Page 3 Hose to These are the minimum parts you Vacuum will need to acquire to use the Dust Deputy: Hose - Shop Vacuum Tools - Dust drum or container that will withstand the vacuum pressure (We recommend at least a 90 mil side thickness otherwise the con- tainer may collapse when in use.) and has a lid that can be tightly...
  • Page 4 How to Make Template for Drum Lid and Assemble Dust Deputy Sealant 1. Place cyclone base in center of drum lid. 2. With pen, trace around base and bolt holes. 3. Connect opposite bolt holes with lines as shown above to fi...

  • Page 5: Troubleshooting

    Troubleshooting Dust Deputy not separating well. (Only a tiny amount of dust should reach the vacuum.) Air leak. Check cyclone fl ange / drum lid / barrel. Even small leaks will affect performance. Low air volume. Vacuum fi lter clogged. Blockage in hose. Material swirls in cyclone and won’t drop down into drum.
  • Page 6 Adding Cyclones to Improve Performance Top View This arrangement may be useful for very fi ne dust situations. Attach in Series Increases particle effi ciency. Top View 200 CFM 100 CFM 100 CFM Attach in Parallel Same particle effi ciency Your arrangement is only limited but increases CFM.
  • Page 7 Dust Deputy Owner’s Manual 2009...

  • Page 8: Terms And Conditions

    Systems shall be tried in the State of New York, County of Onondaga. Oneida Air Systems shall in no event be liable for death, injuries to persons or property or for incidental, contin- gent, special, or consequential damages arising from the use of our product.

Table of Contents