Assembly Instructions (Continued)
THE MOTOR ASSEMBLY IS VERY HEAVY AND CUMBERSOME; BE SURE TO HAVE ADEQUATE
HELP WHEN LIFTING!
Carefully li Motor Assembly (A) to top of
6
Fan Housing (B) and align the Fan Housing
holes with the motor plate holes following the
orientation shown in [FIG. 6a].
Secure the Motor Assembly to the Fan
Housing using seven Flange Bolts (O2) and
seven Flat Washers (O3). [FIG. 6b]
Note:
e eighth hole on the Fan Housing (B)
does not require a bolt because it is inaccessible
[FIG. 6a].
Unwrap the braided lter grounding wire
from the Motor cowling and let hang loose for
future grounding steps [FIG. 6c]. Also, unclip
the Remote from the Filter Grounding Wire
[FIG. 6d].
x
FIG. 6a
FIG. 6b
FIG. 6c
FIG. 6d
oneida-air.com
11