Audio Setting; Audio Output Device - Yealink VC800 User Manual

If Auto is selected, the system will select the appropriate bandwidth automatically.
Press or
8.
The priority of bandwidth is as follows:
Note
System bandwidth > Contact bandwidth (refer to
For example: the system bandwidth is 512kbps, if contact bandwidth is set to a value greater than
512bps, then the actual contact bandwidth will be 512bps. If contact bandwidth is set to a value
less than 512bps, then the actual contact bandwidth will be the value set by user.
Bandwidth is configurable via web user interface at the path Setting->Call Features->Uplink
Bandwidth/Downlink Bandwidth.

Audio Setting

Audio Output Device

The system supports the following audio devices:
Auto (audio output device with the highest priority is selected automatically)

VCS Phone (CP960 Conference phone)

HDMI (built-in speakerphone of the display device)

Line Output (speakerphone connected to the Line Out port on the VC800codec. This is not

applicable to VC500 endpoint)
Customizing the VC800 Video Conferencing System
to select Save and then press to accept the change.
Adding Contacts).
75