Cs0_Adr_180000H.prc; Pll_32Mhz.prc - Fujitsu FR Series Application Note

32-bit microcontroller
Hide thumbs Also See for FR Series:
Table of Contents

Advertisement

set memory/halfword H'642=H'0F
set memory/byte H'660=H'11
set memory/byte H'668=H'01
enable verifymode

5.2.2 CS0_ADR_180000h.PRC

# THIS SAMPLE CODE IS PROVIDED AS IS AND IS SUBJECT TO ALTERATIONS. FUJITSU
# MICROELECTRONICS ACCEPTS NO RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR
# ELIGIBILITY FOR ANY PURPOSES.
#
# CS0_ADR_180000h.PRC
# ===========
#
# Procedurefile for the FR-Emulator - Target : MB91FV360.
# Should be executed before loading any target-file into
# the emulator.
# The file enables ONLY CS0 for the ROM-area 18:0000...1F:FFFF.
# Setting the CS0-Jumper to SRAM on the emulation board
# allows to emulate ROM-areas the same way as in the Flash-Chip.
# MB2197-120 : S1-0 : EVA;
#
# V1.0 by JR
# last modification : 23.10.2001
#
printf "set CS0 : 18:0000 .. 1F:FFFF\n"
disable verifymode
set memory/halfword H'640=H'18
set memory/halfword H'642=H'07
set memory/byte H'660=H'11
set memory/byte H'668=H'01
enable verifymode

5.2.3 PLL_32MHz.PRC

# THIS SAMPLE CODE IS PROVIDED AS IS AND IS SUBJECT TO ALTERATIONS. FUJITSU
# MICROELECTRONICS ACCEPTS NO RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR
# ELIGIBILITY FOR ANY PURPOSES.
#
# PLL_32MHz.PRC
# ===========
#
# Procedurefile for the FR-Emulator - Target : MB91FV360.
# Should be executed before loading any target-file into
# the emulator.
# The file sets the PLL-Clock to 32MHz for faster download.
#
# V1.0 - 25.10.2001
#
first release
#
printf "\nprocedure file : PLL_32MHz.prc\n\n"
#--------------------------------------------------------------------------
--
printf "CPU Clock set to 32MHz \n"
AN-910011-18
Chapter 5 Appendix
# AMD0=11 32-Bit, 1 Wait-state
# only CS0 enabled for ROM-download
(C) Fujitsu Microelectronics Europe GmbH
S2-0 : SRAM
# because ASR/AMR are Write only
# AMD0=11 32-Bit, 1 Wait-state
# only CS0 enabled for ROM-download
(C) Fujitsu Microelectronics Europe GmbH
by JR
# AMR0=0F CS1-End
# ASR0=00 CS0-Begin=18:0000
# AMR0=0F CS1-End
- 24 -
© Fujitsu Microelectronics Europe GmbH
=0F:FFFF
=1F:FFFF

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mb91360

Table of Contents