Removing Balloon - FujiFilm EB-530US Operation Manual

Chapter 6 Method of Use
(3) Remove the EVE connector from the processor.
(4) Remove the LG connector from the processor.
(5) Turn off the power supply of the diagnostic ultrasound
system.
(6) Loosen the lock handle and dismount the US connector
from the diagnostic ultrasound system.
6.7.4

Removing Balloon

(1) Remove the balloon ring (Big) from the balloon
installation groove.
(2) Roll the balloon slowly toward the distal end of the
Ultrasonic Endoscope to remove.
[Note]
Do not pinch the transducer with your fingers.
[Note]
If the balloon is too slippery to be held, cover the balloon
with gauze for easier removal.
Discard removed balloon.
[Note]
Do not clean the Ultrasonic Endoscope with the balloon
attached at the distal end.
6-20