Manual Operation; Wi-Fi Configuration - Goodwe ET Series User Manual

Hybrid inverter
Hide thumbs Also See for ET Series:
Table of Contents

Advertisement

User Manual V1.0-2021-06-15

03 MANUAL OPERATION

3.1 Wi-Fi Configuration

This part shows the configuration using a web page.
Wi-Fi configuration is absolutely necessary for online monitoring and maintenance.
Preparation:
1. The inverter must be powered up with battery or grid power.
2. A router with internet access to the website www.semsportal.com is required.
1
1. Connect Solar-Wi-Fi* to your PC or
smart phone (* its name is the last 8
characters of the inverter's serial number);
Password:12345678.
2. Open your browser and logon to
10.10.100.253 Admin (User): admin; Password:
admin.
3. Then click "OK".
2
1. Click "Start Setup" to choose your router.
2. Then click "Next".
Device information
Firmware version
MAC address
Wireless AP mode
SSID
IP address
Wireless STA mode
Router SSID
Encryption method
Encryption algorithm
Router Password
No router, weak Wi-Fi signal, or the password is not correct
Help: The wizard will help you to complete setup
within one minute.
Please select your current wireless network
SSID
AUTH/ENCRY
Wi-Fi_Burn-in
WPAPSKWPA2PSK/TKIPAES
Wi-Fi_Burn-in
WPAPSKWPA2PSK/TKIPAES
Wi-Fi_Burn-in
WPAPSKWPA2PSK/TKIPAES
Wi-Fi_Burn-in2
WPAPSKWPA2PSK/TKIPAES
Help: When the RSSI of the selected Wi-Fi network is below
15%, the connection may be unstable. Please select another
available network or decrease the distance between the
device and router. If your wireless router does not broadcast
its SSID, please click "Next" and manually add the wireless
network.
3
1. Fill in the password of the router, then
click "Next".
2. Click "Complete".
1.6.9.3.38.2.1.38
60:C5:A8:60:33:E1
Enable
Solar-Wi-Fi
10.10.100.253
Disable
WiFi_Bum-in
WAP/WAP2-PSK
AES
WiFi_Bum-in
Start Setup
RSSI
Channel
66
1
100
1
70
1
72
1
Refresh
Back
Next
23
03 MANUAL OPERATION
10.10.100.253
Admin(U):
admin
Password:
admin
Remember the password (R)
Add the wireless network manually
Network name (SSID)
Encryption method
Encryption algorithm
Please enter the wireless network password:
Password (8-63 characters)
Note: The SSID and password are case sensitive. Please make
sure all parameters of the wireless network match those of the
router, including the password.
Save success!
OK
Cancel
Wi-Fi-Test
WPA/WPA2-PSK
AES
Router password
Show psk
Back
Next
Back
Complete

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents