Pv Master; Commissioning Via Pv Master - Goodwe ET Series User Manual

03 MANUAL OPERATION
Note:
1. Please make sure the password and encryption method/algorithm are the same as those of the
router.
2. If everything went well, the WiFi indicator on the inverter will change from a double blink to 4 blink
and then to a steady status, which means that the WiFi has successfully connected to the server.
WiFi Reset & Reload
WiFi reset means restarting the WiFi module. The WiFi settings will automatically be reprocessed
and saved. WiFi Reload means setting the WiFi module to the default factory settings.
WiFi Reset Button
WiFi reset
Short press the reset button.
The WiFi LED will blink for a few seconds.
Note:
The WiFi reset and reload function can be used only when:
1. WiFi disconnects with the internet or cannot connect successfully to the PV Master App.
2. "Solar-WiFi signal" cannot be found or other WiFi configuration problems exist.
Do not press the button if WiFi monitoring is working correctly.
Replace the module using the unlock tool.

3.2 PV Master

PV Master is an external monitoring and configuration application for hybrid inverters and is
used on smart phones or tablets for both Andriod and iOS systems. The main functions are
listed as below:
1. Configure the system to customize functions by the user.
2. Monitor and check the performance of the hybrid system.
3. Access and change the regional settings.
4. Check the inverter firmware version.
5. Set export power limit.
Search PV Master in Google Play or Apple App Store, or scan the QR
code to download the app.
Operation steps are the same for Android system and iOS system
although the two interfaces are slightly different.
For more detailed opertaion instructions, please refer to PV Master
user manual in www.goodwe.com.
Note:
For Australian customers please select from Australia Region A/B/C to comply with AS/NZS 4777.2:2020.
Contact local grid operator to see which Region to select. After setting the safety region, some
parameters in the inverter system will take effect according to the corresponding safety regulations, such
as PU curve, QU curve, trip protection, etc. For Australian and European users, if you need to change the
configuration parameters, please refer to the PV Master user manual.

3.2.1 Commissioning via PV Master

Wi-Fi
RESET
SYSTEM BACK-UP BATTERY GRID
WiFi reload
Long press the reset button more than 3s.
The WiFi indicator will double blink until
the WiFi is configured again.
24
User Manual V1.0-2021-06-15
ENERGY COM Wi-Fi FAULT
PV Master App