Mounting - Goodwe ET Series User Manual

02 Installation Instructions
Rule 4. Ambient temperature should be lower than 45°C (113°F). High ambient temperature will
cause power derating of inverter. The temperature and humidity at the installation site should be
within the appropriate range (60 °C for outdoor unconditioned with solar effects).
Rule 5. It is recommanded that the installation of the inverter should be prevented from direct
sunlight, snow, rain and other negative influences which may cause function impact or life aging.
Keep away
Keep dry
from sunlight
Rule 6. Inverter should be installed at eye level for convenient maintenance.
Rule 7. Product label on inverter should be clearly visible after installation. Do not damage the
lable.
Rule 8. Do not install the inverter when it is snowing or raining. If you have to, pay attention to
the waterproof and moisture-proof of the inverter and distribution box.
Rule 9. Leave enough space around the inverter according to the below figure for natural heat
dissipation.
200mm

2.3.2 Mounting

The inverter must not be installed near flammable or explosive materials or near
equipment with strong electromagnetism.
Keep it clear
of snow
300mm
200mm 300mm
500mm
User Manual V1.0-2021-06-15
Sun
Upward
Downward
Front
Both sides
7
Rain Accmulated snow
---------- 300mm
------ 500mm
------------- 300mm
-------- 200mm