Table of Contents
Advertisement
11
Digital Voltmeter (DVM)and Frequency Counter
DS70000 series oscilloscope provides a built-in digital voltmeter (DVM) and frequency
counter, which enable you to perform an accurate measurement, improving user
experience in counter and frequency measurement.
11.1
Digital Voltmeter (DVM)
The built-in DVM of this oscilloscope provides 3-digit voltage measurements on any
analog channel. DVM measurements are asynchronous from the oscilloscope's
acquisition system and are always acquiring.
Click or tap the function navigation icon
enable the DVM measurement menu. You can also click or tap the "DVM" icon at the
top of the screen to enable the DVM measurement. At this time, the result list is
displayed at the right section of the screen, showing the voltage and mode. As shown
in the figure below:
The specific value above shows the measurement extrema over the last 3 seconds.
Click or tap the DVM result list, and then two sub-menus are displayed: Remove and
Setting. Click or tap Setting to enter the DVM setting menu.
Copyright ©RIGOL TECHNOLOGIES CO., LTD.
All rights reserved.
Digital Voltmeter (DVM)and Frequency Counter
at the lower-left corner of the screen to
DS70000 User Guide
185
Advertisement
Table of Contents
