Editing Entry Code Database; Accessing The Database - PROLEC Liftwatch Rail Operator's Manual

15. Editing the entry code database
The system has been configured to work with the on-board Operator Database and will prompt for a valid and in-date operator pass code each time the
system is switched on. The operator database can be maintained using the following procedure.

15.1 Accessing the database

Type NEW OPERATOR
and press enter
Liftwatch Rail Operators Manual 560386-000 Issue 1.2 © Prolec Ltd - Feb 2011
Enter a valid pass code and press Tick.
Save and Edit pass Scroll Scroll
exit code Up Down
The current and unused entries will be listed.
Use keys 3 and 4 (UP/DOWN) arrows to find
an entry, press key 5 to enter the entry.
Select
38 of 45