If the machine is equipped with an hydraulically adjustable boom both maximum and minimum charts are available. Hydraulically adjustable booms allow the
machine to reach the same point in space (i.e. height and radius combination) with a variety of different equipment angles. The minimum loads shown refer
to the least favourable angle combination. The main display operates in real-time with the current equipment angles, and therefore may show a load that is
higher than the equivalent load shown here. Monoboom machines will only have a single load chart, the MIN and MAX icons will not appear. When load
charts are being displayed the RCI is NOT monitoring machine safety status and will prevent ALL machine motions - if no action is taken, the system will
automatically revert to normal operation after 5 seconds by default.