Table of Contents
Advertisement
Logger message
Slew limited
97
Maximum speed exceeded
98
Limit override ON
99
Limit override OFF
100
Limit override auto-OFF
101
Back stab for duty X
102
Calibrate duty for X
103
Time set
104
Date set
105
All event history cleared
106
New log created
107
Power up
108
View loadchart X
109
Set limit entry fail
110
Set lift mode entry fail
111
Non-tandem selected
113
Tandem selected
114
Enter set-up failed
115
Enter set-up
116
Plan mode entry failed
117
Enter plan mode
118
Exit plan mode
119
Site location details
120
Liftwatch Rail Operators Manual 560386-000 Issue 1.2 © Prolec Ltd - Feb 2011
The slew limit was exceeded
Maximum operational speed was exceeded
The limit override key switch has been manually activated
The limit override key switch has been manually cancelled
The limit override key switch has been automatically cancelled
The backward stability data for duty X was set / altered
The load calibration stability data for duty X was set / altered
Real-time clock hours / minutes was adjusted
Real-time clock date / month / year was adjusted
All even history was cleared
A new event logging file was created
The system was switched on
The load chart for duty X was viewed
An attempt to enter the limit set mode failed due to an incorrect code (not RIS1530 Issue 2)
An attempt to enter the lift mode set function failed due to an incorrect code (not RIS1530 Issue 2)
Non tandem lifting mode was selected
Tandem lifting was selected
An attempt to enter system set-up failed due to an incorrect code
System set-up was successfully accessed
An attempt to enter the lift planning mode set function failed due to an incorrect code
Lift planning mode was successfully accessed
Lift planning mode was exited
Site information entered (prefixed to all subsequent event log files)
16
Reason
36 of 45
Advertisement
Table of Contents
