Table of Contents
Advertisement
Logger message
Data back up abort
1
Data backed up
2
Data restore abort
3
Data restore (X unused entries)
4
Boom sensor failed/working
5
Arm sensor failed/working
6
Artic sensor failed/working
7
Qhitch sensor failed/working
8
Extn sensor failed/working
9
Chassis sensor failed/working
10
Slew sensor failed/working
11
Aux slew sensor failed/working
12
Combi failed/working
13
Memory reset
14
Data copy aborted
15
Data copied from disc
16
Data copy failure
17
Data copied to disc
18
Main password now=XXXX
19
Planning password now=XXXX
20
Bucket pin lift point ON/OFF
21
Aux lift point ON/OFF
22
Grab lift point ON/OFF
23
Tracked ON/OFF
24
Liftwatch Rail Operators Manual 560386-000 Issue 1.2 © Prolec Ltd - Feb 2011
The 'escape' key was pressed during a data file upload via the serial port
Serial data file upload successfully completed
The 'escape' key was pressed during a data file download via the serial port
Serial data file download successfully completed (X = unrecognised variables in the download data)
Boom angle sensor working OK or not OK
Arm angle sensor working OK or not OK
Secondary boom angle sensor working OK or not OK (option)
Quick hitch sensor working OK or not OK (option)
Tele-arm extension sensor working OK or not OK (option)
Dual-axis chassis angle sensor working OK or not OK
Primary slew angle sensor working OK or not OK
Secondary angle sensor working OK or not OK (option)
Input/output controller working OK or not OK
A complete memory reset was requested
The 'escape' key was pressed during data file backup to local disc
Data file copied successfully to local disc
Data file unsuccessfully copied to local disc
Data file successfully restored from local disc
The main password was changed to XXXX
The planning mode password was changed to XXXX
Bucket pin selected as a possible lifting point (default = ON)
Auxiliary lifting eye selected as a possible lifting point (default = OFF)
Grabbing selected as a possible lifting point (default = OFF)
System set for either a tracked machine or a wheeled machine (default = OFF)
16
Reason
32 of 45
Advertisement
Table of Contents
