Braking - HERO XPULSE 200T PROGRAMMED FI Manual

CAUTION
! !
Do not shift gears without operation of clutch
and without closing the throttle otherwise this
would lead to damage of gears.

BRAKING

Anti-lock brak ing
This vehicle is equipped with Anti-lock
brak ing system (ABS). ABS enhances active
safety by helping to prevent the wheels from
locking under braking.
ABS is designed to meet two essential
requirements during every brake application:
To help provide vehicle stability
•
To help maintain steering control and
•
manoeuvrability–on road surfaces.
The ABS system is self-regulating and
always active once vehicle speed exceeds
5 km/h.
The ABS computer acts on the basis of the
•
comparative speeds of the front wheel. The
use of non-approved tyres can affect the
speed of the wheels and supply incorrect
information to the ABS computer.
The system has a wheel speed sensor (1),
hydraulic electronic control unit (HECU) (2),
and an ABS indicator lamp (3) on meter
console.
system (ABS)
.
1
(1) Wheel speed sensor
(2) Hydraulic electronic control unit (HECU)
(3) ABS indicator
Whenever you ride
speed sensor monitors the speed of the
wheel and send the input to s
Electronic control unit (HECU). Then
HECU
monitors your
control when vehicle speed exceeds 5 km/h.
38
2
3
, Wheel
your vehicle
Hydraulic
vehicle and takes