Safe Riding Tips - HERO XPULSE 200T PROGRAMMED FI Manual

Table of Contents

Advertisement

Do's:
Always conduct simple pre-ride inspection
(page 34).
Always wear a helmet (ISI marked) with chin strap
securely fastened and insist on a helmet for your
pillion rider.
While riding, sit in a comfortable position with your
legs close to fuel tank.
Ride defensively and at a steady speed (between
40-50 km/hr).
For stopping vehicle, use both brakes simultaneously,
keeping throttle in the close position.
Respect road signs and obey traffic rules for your own
safety and that of others on the road (page 77).
During night time
, dip headlamps of your
oncoming traffic, or when following another
vehicle.
Give way to others on the road and signal before
you make a turn.
To make yourself more visible, wear bright
reflective clothing that fits well.
Take care of loose/hanging clothes while
solo/pillion riding.
Get your
vehicle
Authorised
Hero MotoCorp
Before riding make sure that engine stop/kill switch
is in "ON" ( ) position.
Keep checking the ABS indicator. At any point if
indicator remains on, then ABS is not working
(page 29).
Keep checking speedometer. In case of ABS
malfunction, speed display may go to zero.
It is suggested to go through the do's & dont's of
ABS (page 39) and practice your ABS vehicle
initially in low-traffic condition unless you are
thoroughly familiar with your vehicle and its
controls.

SAFE RIDING TIPS

vehicle
serviced regularly by the
workshop.
Don'ts
Never use cell phone while riding the vehicle.
Avoid sudden acceleration, braking and turning of
your vehicle.
Never shift gears without disengaging the clutch
and closing the throttle.
Never touch any part of the hot exhaust system like
muffler.
Never ride under the influence of alcohol or drugs.
Concentrate on the road and avoid talking to the
pillion rider or others on the road.
Do not litter the road.
Do not cross the continuous white/yellow line in
the center of the road, while overtaking.
for
Do not attach large or heavy items to the
handlebars, front forks, or fenders.
Never take your hands off the steering handle while
riding.
Do not attempt to apply the front brake lever
intermittently for ABS vehicle.
Do n t
o panic
by mechanical noises or slight pedal
pulses while applying the brake in vehicle. These
conditions are normal and
working.
D o
o n t apply the hard braking in wet or rainy
conditions.
Do not switch off the engine stop
riding the vehicle (page 29).
Do not move the side stand down while riding, as
engine will stop while vehicle is in gear (page 31).
Navigation system assists you to reach your
destination, don't be distracted while driving. Drive
safely and always obey traffic rules.
12
indicates that
ABS is
/kill
switch while

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the XPULSE 200T PROGRAMMED FI and is the answer not in the manual?

Table of Contents