HERO XPULSE 200T PROGRAMMED FI Manual page 26

Compatibility and performance of hero ride
•
guide application may very based on your
device and software version.
Application needs GPS signal, internet and
•
bluetooth connectivity to perform the
desired navigation functionality.
Bluetooth:
Your vehicle is equipped with bluetooth
connectivity feature by which you can pair
your smartphone with the meter console of
your XPULSE 200T PROGRAMMED FI
vehicle through Hero navigation application.
To connect your device proceed as follows:
Turn the ignition switch "ON".
•
Open hero navigation application on your
•
smartphone.
Give access to show incoming call
•
information on digital cluster (1).
(1) Access for incoming call information on
digital cluster
NOTE
NOTE
1
For first time pairing, allow the application
•
to access:
a. Contacts
b. Make & manage phone calls
c. Phone call logs on your device
d. Device's location if GPS is not enabled in
your device
a
c
Then the application will automatically start.
•
Application also asks you to accept (2) the
•
terms of use to proceed.
23
b
ALLOW
d
ALLOW