1:Valid when keypad or terminal control
2:Valid when keypad or communication control
3:Always valid
The reset function of STOP/RST is always valid.
Code
F7.05
F7.06
F7.05 and F7.06 define the parameters that can be displayed by LED in running status.
Using a 16 bit binary number,if Bit is 0,the parameter will not be displayed;If Bit is 1,the
parameter will be displayed.Press 0 /SHIFT to look the corresponding parameters in right
order.setting the Code should To convert binary into hexadecimal,than Enter the Code.
The display content corresponding to each bit of F7.05 is described in the following
table:
Name
Running status display selection
Stop status display selection
97
Setting Range
0~0x7FFF0 0x303F0
0~0x7FFF0 0x30060