Craftsman G10-0R7G-2SB Manual page 59

100% of B frequency setting corresponds to the maximum output frequency.Select this
setting if it needs to adjust on the base of a frequency command.
Code
F0.05
0:A
1:B
2:A+B
3:A<=>B
4:A<=>A+B,depend on Xn terminal
5:B<=>A+B,depend on Xn terminal
6:MAX(A,B), taking the maximum values of A and B
7:MIN(A,B), taking the minimum of A and B
8:A is valid for A, and A is invalid for B.
Code
F0.06
When Frequency instruction selection is set to be keypad,this parameter is the initial
value of inverter reference frequency.
Code
F0.07
F0.08
F0.09
F0.07:
Name
Frequency command selection
Name
Keypad reference frequency
Name
Maximum frequency
Frequency upper limit setup
Frequency lower limit setup
59
Setting Range
0ÿ^80 00
Setting Range
0.00 Hzÿ^F0.070 50.00 Hz0
Setting Range
50.00ÿ^300.00 Hz0 50.00
Hz0
F0.09ÿ^F0.070 50.00 Hz0
0.00Hzÿ^F0.080 0.00 Hz0