Craftsman G10-0R7G-2SB Manual page 92

14:Upper frequency limit reached.ON:Running frequency reaches the upper limiting
frequency.
15:Lower frequency limit reached.ON:Running frequency reaches the lower limiting
frequency.
16:Ready.ON:Inverter is ready (no fault, power is ON).
17:FDT2 reached.Please refer to description of F8.18,F8.19.
18:AI1ÿ AI2
19:AI1ÿ F8.29
20:AI1ÿ F8.30
21:AI1 is between F8.29 and F8.30
22:PID discconection
23:Overcurrent output(Running currentÿ F8.33)
Code
F6.06
F6.07
F6.08
Standard of Analog output is either 0ÿ^20mA or 0ÿ^10V.It is able to select the voltage
output or current output through jumper AO1,AO2.The range of HDO ON-OFF output is
0khzÿ^50.0khz.
AO/HDO output functions are indicated in the following table:
Setting value
0
Name
HDO function selection
AO1 function selection
AO2 function selection
Function
Running frequency
92
Range
0ÿ^Maximum frequency
Setting Range
0ÿ^100 00
0ÿ^100 10
0ÿ^100 00