Craftsman G10-0R7G-2SB Manual page 5

for electric closet and the outside world.
● Control circuit wiring should be separated from the power circuit wiring,ÿ in order
to avoid interference.
Wiring
DANGER
● Operation shall be performed by the professional engineering technician.
Otherwise there will be danger of electric shock.
● Make sure the power is disconnected before connecting.Otherwise there will be
danger of electric shock.
● The earth terminal PE shall be earthed reliably. Otherwise there may be danger of
electric shock.
● Do not touch the inverter terminals (including control terminal).Otherwise there will
be danger of electric shock.
● The brake resistor should be connected to the terminals (+) and PB. Otherwise it
may cause fire.
● The primary loop connection cable to the exposed part of the interface, Should
bind up with insulation tape, otherwise there is a risk of damage to property.
5