U-Line UCDE215 User Manual & Service Manual page 11

USER GUIDE
Install Tower on Keg Refrigerator
Do not remove the protective film on the stainless exterior until the tower is installed.
1. Remove four screws and lift off cap plug and gasket to reveal mounting hole on top of refrigerator.
Note: Save gasket and cap plug for conversion back to a standard refrigerator.
2. Insert tap assembly tubing through the provided gasket and then all the way into the refrigerator.
3. Insert and tighten four screws to secure tower to keg refrigerator.
4. Install faucet onto the tower: Line up teeth on the outside of the faucet with the teeth inside the shank
5. Screw the coupling nut onto the faucet and tighten with the faucet wrench.
6. Screw the handle onto the faucet.
General Installation
11
u-line.com