General Installation - U-Line UCDE215 User Manual & Service Manual

USER GUIDE

General Installation

U-Line Single Tap Kits are designed to work with the U-Line keg refrigerator model CDE215F. Tap kits can be installed directly
on top of the keg refrigerator in a free-standing application or through a countertop in a built-in application. The CDE215F is
designed to fit one 1/6 barrel. (Not Included)
1/6 Slim Barrel
Sixth Slim
5 Gallons
53 - 12 oz. cups
9.25" x 23.5"
Safety and Warning
WARNING
!
CO2 can be dangerous. Handle with care.
Never exceed 60 PSI.
Most draft beers are dispensed between 8-14
PSI and most stouts are dispensed at 30-14 PSI.
Pressures above 50 PSI will release the built-in
pressure relief.
Always connect CO2 tank to regulator. Never
connect the tank directly to the keg.
Ventilate area after CO2 leak:
If it becomes difficult to breathe and your head
starts to ache, high levels of CO2 may be pres-
ent. LEAVE THE ROOM IMMEDIATELY.
General Installation
Kit includes:
1. Tower (includes faucet, handle, gasket, wrench, & clamp)
2. Drip tray
1
2
Safety and Warning
Keep CO2 tank in an upright position. The regulator
may break if the tank falls.
Secure the CO2 tank
CAUTION
!
.
10
u-line.com