SECTION 5
FIGURE 5.14
Bolt with metric thread
(1) strength class, (d) thread diameter
TIP
Hydraulic conduits should be tightened using torque of 50 – 70 Nm.
5.11 INSTALLATION AND DISASSEMBLY OF THE FRAME
AND TARPAULIN COVER
Tarpaulin cover can only be used together with the frame. The assembly of wall extensions
should be carried out with the use of appropriate platforms, ladders, ramps or other stable
raised surfaces. Particular care should be taken, holding onto the trailer with one hand. Work
should be done with the help of another person.
The frame structure comprises front apex (1) – figure (5.15), rear apex (2), centre apex (3),
ridge pipe (4), and two rim pipes (5).
Assembly of frame and tarpaulin
attach front apex (1) to the front wall extension,
attach rear apex (2) to the rear wall extension,
5.39
Pronar T680