Change An Advanced 802.1Q Vlan - NETGEAR MS108EUP User Manual

8-port Ultra60 PoE++ Multi-Gigabit (2.5G) Ethernet Plus Switch
The password is the one that you specified the first time that you logged in. The
password is case-sensitive.
The HOME page displays.
4. From the menu at the top of the page, select SWITCHING.
The QOS page displays.
5. From the menu on the left, select VLAN.
The VLAN page displays.
If you did not yet activate the Advanced 802.1Q VLAN mode, see Activate the
advanced 802.1Q VLAN mode on page 46.
6. In the right pane, click the ADD VLAN button.
The Advanced 802.1Q VLAN pane displays.
7. Specify the VLAN settings and assign ports as tagged or untagged members:
a. In the VLAN Name field, enter a name from 1 to 14 characters.
b. In the VLAN ID field, enter a number from 1 to 4093.
c. Use a combination of the following options to select port tags and set whether
ports are members of the VLAN:
• T: Make the port a tagged member of the VLAN.
• U: Make the port an untagged member of the VLAN.
• E: Exclude the port from the VLAN.
• Tag All: Make all ports tagged members of the VLAN.
• Untag All: Make all ports untagged members of the VLAN.
• Exclude All: Exclude ports from the VLAN.
Note: If ports are members of the same LAG, you must assign them to the same
VLAN.
8. Click the APPLY button.
Your settings are saved. The new VLAN shows in the Advanced 802.1Q VLAN pane.

Change an advanced 802.1Q VLAN

You can change the settings for an existing advanced 802.1Q VLAN.
Use VLANS for Traffic
Segmentation
48 User Manual