NETGEAR MS108EUP User Manual page 107

8-port Ultra60 PoE++ Multi-Gigabit (2.5G) Ethernet Plus Switch
To view or clear the port statistics:
1. Open a web browser from a computer that is connected to the same network as the
switch, or connected directly to the switch through an Ethernet cable.
2. Enter the IP address that is assigned to the switch.
A login window opens.
3. Enter the device management password.
The password is the one that you specified the first time that you logged in. The
password is case-sensitive.
The HOME page displays.
4. Select DIAGNOSTICS > PORT STATISTICS.
The PORT STATISTICS page displays.
For each port, the page lists the bytes received, bytes sent, and cyclic redundancy
check (CRC) error packets, which are packets with errors or corrupt packets.
5. To clear the port statistics, click the CLEAR COUNTERS button.
All statistics counters change to 0.
6. To refresh the port statistics, click the REFRESH button.
All statistics counters are updated.
Diagnostics and
Troubleshooting
107 User Manual