View Switch Connections; View The Status Of A Port - NETGEAR MS108EUP User Manual

8-port Ultra60 PoE++ Multi-Gigabit (2.5G) Ethernet Plus Switch
The following fields display:
• Daylight Saving (DST): Displays the type of daylight setting enabled.
• Begins At: Displays the scheduled settings for the start of the daylight savings
period.
• Ends At: Displays the scheduled settings for the end of the daylight savings
period.
• Offset (in Minutes): Displays the daylight savings time offset in minutes.
• Zone: Select the time zone for your location.
• Daylight Saving (DST) in Effect: Indicates whether the daylight savings offset
is currently being applied to system time.

View switch connections

You can see the number of connections that are established on the switch.
To see the number of connections on the switch:
1. Open a web browser from a computer that is connected to the same network as the
switch, or connected directly to the switch through an Ethernet cable.
2. Enter the IP address that is assigned to the switch.
A login window opens.
3. Enter the device management password.
The password is the one that you specified the first time that you logged in. The user
name and password are case-sensitive.
The HOME page displays.
The switch connections show in the upper left of the page.

View the status of a port

You can view the port status and drill down for details about the port.
To view the status of a port:
1. Open a web browser from a computer that is connected to the same network as the
switch, or connected directly to the switch through an Ethernet cable.
2. Enter the IP address that is assigned to the switch.
A login window opens.
Maintain and Monitor the Switch 91 User Manual