Edit Or Disable A Poe Schedule - NETGEAR MS108EUP User Manual

8-port Ultra60 PoE++ Multi-Gigabit (2.5G) Ethernet Plus Switch
The password is the one that you specified the first time that you logged in. The
password is case-sensitive.
The HOME page displays.
4. Select POE > POE SCHEDULE.
The POE SCHEDULE page displays.
5. Click the toggle to select Apply to single port or Apply to multiple ports.
6. Click one or more ports.
When a port is selected, the port button displays solid purple.
7. Click the Start Date field and select the date from the pop-up menu.
Your start date displays. You must select both a start and an end date.
8. Click the End Date field and select the date from the pop-up menu.
Your end date displays. You must select both a start and an end date.
9. For each day of the week that you want to schedule PoE, use the sliders to set one
or two the ranges.
Green indicates that PoE is enabled. The start and end times for each selected range
display.
10. When your settings are complete, click the APPLY button.
The schedule is enabled.

Edit or disable a PoE schedule

To edit the or disable a PoE schedule:
1. Open a web browser from a computer that is connected to the same network as the
switch, or connected directly to the switch through an Ethernet cable.
2. Enter the IP address that is assigned to the switch.
A login window opens.
3. Enter the device management password.
The password is the one that you specified the first time that you logged in. The
password is case-sensitive.
The HOME page displays.
4. Select POE > POE SCHEDULE.
The POE SCHEDULE page displays.
5. If your configured schedule applied to a single port and you want to apply it to more
than one port, click the toggle to select Apply to Multiple Ports.
Maintain and Monitor the Switch 100 User Manual