Safety Instructions And Warnings - NETGEAR MS108EUP User Manual

8-port ultra60 poe++ multi-gigabit (2.5g) ethernet plus switch
Hide thumbs Also See for MS108EUP:
Table of Contents

Advertisement

8-port Ultra60 PoE++ Multi-Gigabit (2.5G) Ethernet Plus Switch

Safety instructions and warnings

Use the following safety guidelines to ensure your own personal safety and to help
protect your system from potential damage.
To reduce the risk of bodily injury, electrical shock, fire, and damage to the equipment,
observe the following precautions:
• This product is designed for indoor use only in a temperature-controlled and
humidity-controlled environment. Note the following:
-
For more information about the environment in which this product must operate,
see the environmental specifications in the appendix or the data sheet.
-
If you want to connect the product to a device located outdoors, the outdoor
device must be properly grounded and surge protected, and you must install an
Ethernet surge protector inline between the indoor product and the outdoor
device. Failure to do so can damage the product.
-
Before connecting the product to outdoor cables or devices, see
https://kb.netgear.com/000057103 for additional safety and warranty information.
Failure to follow these guidelines can result in damage to your NETGEAR product,
which might not be covered by NETGEAR's warranty, to the extent permissible by
applicable law.
• Observe and follow service markings:
-
Do not service any product except as explained in your product documentation.
Some devices should never be opened.
-
If applicable to your product, opening or removing covers that are marked with
the triangular symbol with a lightning bolt can expose you to electrical shock.
We recommend that only a trained technician services components inside these
compartments.
• If any of the following conditions occur, unplug the product from the power outlet,
and then replace the part or contact your trained service provider:
-
Depending on your product, the power adapter, power adapter cable, power
cable, extension cable, or plug is damaged.
-
An object fell into the product.
-
The product was exposed to water.
-
The product was dropped or damaged.
-
The product does not operate correctly when you follow the operating
instructions.
Hardware
11
User Manual

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents