Delete Certificates For Https Access - NETGEAR MS108EUP User Manual

8-port Ultra60 PoE++ Multi-Gigabit (2.5G) Ethernet Plus Switch
switch. Before you transfer a file from a TFTP server to the switch, the following conditions
must be met:
• The file that you transfer from a TFTP server is on the server in the appropriate
directory.
• The file is in the correct format.
• The switch contains a path to the TFTP server.
Note: HTTPS must be enbled before you can install a certificate from a TFTP server.
For more information, see Configure HTTPS access settings on page 76.
To transfer an SSL certificate from a TFTP server to the switch:
1. Open a web browser from a computer that is connected to the same network as the
switch, or connected directly to the switch through an Ethernet cable.
2. Enter the IP address that is assigned to the switch.
A login window opens.
3. Enter the device management password.
The password is the one that you specified the first time that you logged in. The
password is case-sensitive.
The HOME page displays.
4. Select SETTINGS > WEB ACCESS > Certificate Configuration.
5. In the Certificate Update menu, TFTP Server IP address field, type in the IP address.
6. In the Remote File Path field, type in the path to the PEM file on the TFTP server.
7. In the Remote File Name field, type in the PEM file name, including the .pem
extension.
8. Select the Start File Transfer check box.
9. Click the APPLY button.
The Certificate Generation Status field displays Certificate generation in progress.
When the certificate is generated, the Certificate Present field displays Yes.
You can now enable HTTPS.

Delete certificates for HTTPS access

You can delete previously created certificates for HTTPS access.
Note: You must disable HTTPS before you can delete a certificate. For more information,
see Configure HTTPS access settings on page 76.
Maintain and Monitor the Switch 79 User Manual