Graco EcoQuip 2 Vapor Abrasive Blast System Operation, Repair, And Parts page 70

Technical Specifications
EQc and and EQc EQc Elite Elite
EQc EQc and EQc Elite
EcoQuip 2 2 2 EQc EQc and and EQc EQc Elite
EcoQuip EcoQuip EQc and EQc
Maximum Fluid Working Pressure
Operating Temperature
Recommended Compressor Size+
Blast Hose Size
Abrasive Capacity*
Dry Weight
Wet Weight*
Pressure Pot Volume
Air Inlet Connection†
Pump Inlet Fitting
Minimum Inlet Hose ID
Maximum Recommended Rise from Water Tank
Outlet to Pump Inlet
* Abrasive capacity and wet weight was found using 80 grit garnet. Using coarser media or less dense
media will decrease weight.
† 2 in. ground boss adapter included in tool box (see the Parts section of the EcoQuip 2 manual for more
detail)
Air Supply Hose Minimum ID
185–600 CFM compressor and less than 100 ft.
hose length
Over 600 CFM compressor or greater than 100
ft. hose length
Sound Data**
Sound Pressure Level
Sound Power Level
Instantaneous Sound Pressure Level
** All readings were taken at the maximum system blast pressure 175 psi (12.1 bar, 1.21 MPa) from the
operator position. The abrasive used was garnet and the substrate was steel. Tested in accordance with
ISO 9614-2.
+ See the Nozzle Selection Guide for information on how to properly select the blast nozzle based on
compressor pressure and flow output specifications.
70
All manuals and user guides at all-guides.com
Elite
Elite
U.S.
U.S. U.S.
175 psi
35˚ - 110˚ F
185–900 CFM
1.25 in. ID
880 lb.
450 lb.
1500 lb.
6.5 cubic feet
1–1/2 npt
Dixon 6EM6–B quick disconnect interchange included
(3/4 in. NPT also on pump)
5 ft
16 in.
1.5 in. ID
2 in. ID
133 dB(A)
139 dB(A)
131 dB(C)
Metric Metric Metric
12.1 bar, 1.21 MPa
1.6˚ - 43.3˚ C
5.2–25.5 M^3/min
31.75 mm ID
400 kg
204 kg
680 kg
184 liters
– – – – –
4.5 m
41 cm
38 mm ID
51 mm ID
133 dB(A)
139 dB(A)
131 dB(C)
3A3489E