Graco EcoQuip 2 Vapor Abrasive Blast System Operation, Repair, And Parts page 69

EQs2 Elite Elite
EQs2 EQs2 Elite
EcoQuip 2 2 2 EQs2 EQs2 Elite Elite
EcoQuip EcoQuip EQs2 Elite
Maximum Fluid Working Pressure
Operating Temperature
Recommended Compressor Size
Blast Hose Size
Abrasive Capacity*
Dry Weight
Wet Weight*
Pressure Pot Volume
Water Tank Volume
Air Inlet Connection†
* Abrasive capacity and wet weight was found using 80 grit garnet. Using coarser media or less dense
media will decrease weight.
† 2 in. ground boss adapter included in tool box (see Parts section of the EcoQuip 2 manual for more detail).
Air Supply Hose Minimum ID
185–600 CFM compressor and less than 100 ft.
hose length
Over 600 CFM compressor or greater than 100
ft. hose length
Sound Data**
Sound Pressure Level
Sound Power Level
Instantaneous Sound Pressure Level
** All readings were taken at the maximum system blast pressure 150 psi (10.3 bar, 1.03 MPa) from the
operator position. The abrasive used was garnet and the substrate was steel. Tested in accordance with
ISO 9614-2.
3A3489E
All manuals and user guides at all-guides.com
Technical Specifications
U.S.
U.S. U.S.
175 psi
35˚ - 110˚ F
375-1600 CFM
1.25 in. ID
1760 lb.
1560 lb.
3650 lb.
6.5 cubic feet
NA
1–1/2 npt
1.5 in. ID
2 in. ID
133 dB(A)
139 dB(A)
131 dB(C)
Metric Metric Metric
12.1 bar, 1.21 MPa
1.6˚ - 43.3˚ C
10.6-45.3 m^3/min
31.75 mm ID
798 kg
707.6 kg
1655.6 kg
184 liters
NA
– – – – –
38 mm ID
51 mm ID
133 dB(A)
139 dB(A)
131 dB(C)
69