Eqs2 Elite Only) - Graco EcoQuip 2 Vapor Abrasive Blast System Operation, Repair, And Parts

Table of Contents

5. Connect the blast hose, hose restraints, control

hoses, and coupler pins.

NOTICE

Do not use a wrench when installing the nozzle.

Damage to the seal could occur. To avoid seal

damage, always hand-tighten the nozzle.

3A3489E

All manuals and user guides at all-guides.com

Connecting the

the Water

Water Hose

Connecting

the

Water

(EQm and

and EQs2

EQs2 Elite

Elite only)

(EQm

and

EQs2

Elite

1. Connect to a water supply hose with a minimum

ID of 3/4 in. (19 mm) to the garden hose

connection on the pump inlet.

NOTE: The maximum water supply pressure is

NOTE:

100 psi (6.8 bar, 0.68 MPa). The minimum flow

requirement is 3 gpm (11 lpm).

Operation

Hose

only)

Table of Contents