Graco EcoQuip 2 Vapor Abrasive Blast System Operation, Repair, And Parts page 68

Technical Specifications
EQs Elite Elite
EQs EQs Elite
EcoQuip 2 2 2 EQs EQs and and EQs EQs Elite
EcoQuip EcoQuip EQs and EQs
Maximum Fluid Working Pressure
Operating Temperature
Recommended Compressor Size+
Blast Hose Size (supplied)
Abrasive Capacity*
Dry Weight
Wet Weight*
Pressure Pot Volume
Water Tank Volume
Air Inlet Connection†
* Abrasive capacity and wet weight was found using 80 grit garnet. Using coarser media or less dense
media will decrease weight.
† 2 in. ground boss adapter included in tool box (see the Parts section of the EcoQuip 2 manual for more
detail).
Air Supply Hose Minimum ID
185–600 CFM compressor and less than 100 ft.
hose length
Over 600 CFM compressor or greater than 100
ft. hose length
Sound Data**
Sound Pressure Level
Sound Power Level
Instantaneous Sound Pressure Level
** All readings were taken at the maximum system blast pressure 150 psi (10.3 bar, 1.03 MPa) from the
operator position. The abrasive used was garnet and the substrate was steel. Tested in accordance with
ISO 9614-2.
+ See the Nozzle Selection Guide for information on how to properly select the blast nozzle based on
compressor pressure and flow output specifications.
68
All manuals and user guides at all-guides.com
Elite
Elite
U.S.
U.S. U.S.
175 psi
35˚ - 110˚ F
185-900 CFM
1.25 in. ID
880 lb.
1070 lb.
3120 lb.
6.5 cubic feet
115 gallon
1–1/2 npt
1.5 in. ID
2 in. ID
133 dB(A)
139 dB(A)
131 dB(C)
Metric Metric Metric
12.1 bar, 1.21 MPa
1.6˚ - 43.3˚ C
5.24-25.5 m^3/min
31.75 mm ID
400 kg
485 kg
1415 kg
184 liters
435 liters
– – – – –
38 mm ID
51 mm ID
133 dB(A)
139 dB(A)
131 dB(C)
3A3489E