Replacing The Datatrak Fuse - Graco EcoQuip 2 Vapor Abrasive Blast System Operation, Repair, And Parts

Replacing Replacing the Replacing the the DataTrak DataTrak Fuse DataTrak
FIRE FIRE AND FIRE AND EXPLOSION AND EXPLOSION HAZARD EXPLOSION
To reduce the risk of fire and explosion, the fuse
must be replaced in a non-hazardous location.
Use only an approved replacement fuse (see
table). Use of an unapproved fuse will void Graco's
warranty.
Replace Fuse Fuse
Replace Replace Fuse
1. Remove the screw, metal strap, and plastic
holder.
2. Pull the fuse away from the board
3. Replace with an approved fuse.
3A3489E
All manuals and user guides at all-guides.com
Fuse Fuse
HAZARD HAZARD
Approved Fuses
Approved Approved
DataTrak Part Part
DataTrak DataTrak Part *Series Letter *Series *Series
Number
Number Number
17K057 A or B
C and later
All other part A
numbers
B and later
Repair
Fuses
Fuses
Fuse Required Required
Letter Fuse Letter Fuse Required
24C580
24V216
24C580
24V216
31