Technical Specifications - Graco EcoQuip 2 Vapor Abrasive Blast System Operation, Repair, And Parts

Technical Specifications

Specifications
Technical Technical Specifications
EQm
EQm EQm
EcoQuip 2 2 2 EQm EQm
EcoQuip EcoQuip EQm
Maximum Fluid Working Pressure
Operating Temperature
Recommended Compressor Size+
Blast Hose Size (supplied)
Abrasive Capacity*
Dry Weight
Wet Weight*
Pressure Pot Volume
Air Inlet Connection†
Water Inlet Connection
* Abrasive capacity and wet weight was found using 80 grit garnet. Using coarser media or less dense
media will decrease weight.
† 2 in. ground boss adapter included in tool box (see Parts section of the EcoQuip 2 manual for more detail).
Air Supply Hose Minimum ID
185–600 CFM compressor and less than 100 ft.
hose length
Over 600 CFM compressor or greater than 100
ft. hose length
Sound Data**
Sound Pressure Level
Sound Power Level
Instantaneous Sound Pressure Level
** All readings were taken at the maximum system blast pressure 150 psi (10.3 bar, 1.03 MPa) from the
operator position. The abrasive used was garnet and the substrate was steel. Tested in accordance with
ISO 9614-2.
+ See the Nozzle Selection Guide for information on how to properly select the blast nozzle based on
compressor pressure and flow output specifications.
3A3489E
All manuals and user guides at all-guides.com
3/4 in. garden hose
Technical Specifications
U.S.
U.S. U.S.
175 psi
35˚ - 110˚ F
185–600 CFM
1.25 in. ID
440 lb.
370 lb.
900 lb.
3.5 cubic feet
1–1/2 npt
connection
1.5 in. ID
2 in. ID
133 dB(A)
139 dB(A)
131 dB(C)
Metric
Metric Metric
12.1 bar, 1.21 MPa
1.6˚ - 43.3˚ C
5.3-17 m^3/min
31.75 mm ID
200 kg
168 kg
408 kg
99 liters
– – – – –
19 mm garden hose
connection
38 mm ID
51 mm ID
133 dB(A)
139 dB(A)
131 dB(C)
67