Table of Contents
Advertisement
DAP-1360U Wireless N300 Access Point & Router
User Manual
In order to let wired PCs connected to your device access the network of a wireless router, on the
Device mode page, from the Connection method list, select the Wi-Fi value. Then from the
Work mode list select the Client value. In this mode you can change the LAN IP address, connect
your device to another access point and set your own password for access to the web-based
interface of the device.
Also you can enable the WDS function via the Initial Configuration Wizard. To do this, on the
Device mode page, from the Connection method list, select the Wi-Fi value. Then from the
Work mode list select the WDS value. In this mode you can specify the WDS function
parameters, change the LAN IP address, set your own settings for the wireless network, and set your
own password for access to the web-based interface of the device.
Figure 25. Selecting an operation mode. The Client mode.
Figure 26. Selecting an operation mode. The WDS mode.
Page 33 of 158
Configuring via Web-based Interface
Advertisement
Table of Contents
